JEEP REAR CV DRIVE SHAFT (84-01 CHEROKEE XJ 4WD | FOR NP242 TRANSFER CASE)

JEEP REAR CV DRIVE SHAFT (84-01 CHEROKEE XJ 4WD | FOR NP242 TRANSFER CASE)

  • $299.95


JEEP REAR CV DRIVE SHAFT (84-01 CHEROKEE XJ 4WD | FOR NP242 TRANSFER CASE)

OVERVIEW

This double cardan style CV drive shaft is recommended for Jeep XJ Cherokee models equipped with 4in - 6in suspension lifts to prevent driveline vibration and the rear output shaft from breaking.

FEATURES

  • Collapsed Measurement: 28.25-inches
  • Extended Measurement: 32.75-inches
  • After lifting your Jeep XJ Cherokee a CV (Double Cardan) drive shaft is a good choice to eliminate vibration issues and provide the longest lasting drive shaft.
  • Includes better quality CV joints.
  • Shaft strength is twice as strong as the factory equipped drive shaft.
  • Grease fittings are out of the way of the transmission oil pan meaning you get grease to the joints that need it and not all over the botom of your Jeep.

NOTES - IMPORTANT

  • A Slip Yoke Eliminator is REQUIRED.
  • Recommended on models with 4in - 6in of lift.
  • ONLY fits 6cyl automatic models.
  • Only fits NP242 transfer case with yoke style slip yoke eliminator.
More Information
SKU 5084.1
Est. Install Time 2-3 hours

VEHICLE FITMENT

YEARS DRIVE MAKE MODEL
1984-2001 4WD Jeep Cherokee XJ
ALWAYS read all product page details for more important fitment information

We Also Recommend

CHRYSLER 8.25 MASTER INSTALL KIT (JEEP XJ - REAR AXLE)

CHRYSLER 8.25 MASTER INSTALL KIT (JEEP XJ - REAR AXLE)

8.25 NOTCHED CROSS PIN - 4.88 RATIO (JEEP XJ)

8.25 NOTCHED CROSS PIN - 4.88 RATIO (JEEP XJ)

DANA 44 RING & PINION SET - 4.56 RATIO (JEEP WRANGLER JK RUBICON - FRONT AXLE)

DANA 44 RING & PINION SET - 4.56 RATIO (JEEP WRANGLER JK RUBICON - FRONT AXLE)

DANA 44 RING & PINION SET - 5.13 RATIO (JEEP TJ RUBICON - REAR AXLE)

DANA 44 RING & PINION SET - 5.13 RATIO (JEEP TJ RUBICON - REAR AXLE)

Side adjuster tool for Chrysler 7.25″, 8.25″, and 9.25

Side adjuster tool for Chrysler 7.25″, 8.25″, and 9.25