Jeep Wrangler JK Front Lower Adjustable Link Kit

Part Number: 

 OPJKFLAL-KIT

So beefy, these arms will not bend! This is an awesome kit to replace those wimpy stock front lower control arms. We had to buy a very serious tubing bender just to make these (Of course we will use it to make other new cool stuff!). It does take a lot to bend that clearance curve in 2"x.25" D.O.M. tube. 

The arms come with everyting you see pictured, the tubing with the weld bungs already in place, Two of our 1.25" Heat Treated Chromoly Heim Joints with jam nuts and misalignment's for a 9/16" Bolt. Flexible yet durable poly bushings included as well, with the inner sleeve for a 9/16" Bolt. 

Fully welded and ready to install! Works for stock height up to 3.5" of lift

Adjustable Jeep Control Arms OVERVIEW

Ruffstuff Adjustable Strong Arms 

Lets get this right out in the open, my math is not that great but I calculate these are at least 4 times stronger than stock factory control arms for the Jeep JK, TJ, LJ & XJ! The factory arms are weak and need replacement. I don’t think you will bend ours and there are lots of advantages. 

• These have 1.25” Heim joints for the lowers and 7/8” Heim uppers. The Heims allow for more than twice the travel (36 Degrees) of the factory bushings (~10 degrees).
• Both our heims and bushings are easily replaced, you do not need a press to replace them.
• The Upper arms are not a simple butt joint, they are seriously reinforced where they meet the housing.
• The tubing of the lower control arm is 2” x .25” wall DOM, the upper’s are 1.5” X .25” and made to take any hit you can throw at them.
• These are all Jig Built by Humans (Not Machines) here in Loomis California With steel made in Alabama or Chicago.
  These are exact replacements for stock, just plug and play. These come in pairs, 1 Left & 1 Right. No Gimmicks, just Bad Ass!