Jeep Wrangler JK Adjustable Rear Lower Control Arms

Part Number: 

 OPR1602

Fully welded, bolt-in replacement Lower control arm for the rear of any Jeep Wrangler JK. Made with our famous 1-1/4" Heim joints on one end, and our DOM Poly bushing on the other, you get a blend of performance and comfort that will outlast any other. Tubing is 2" OD, 1/4" thick DOM that we sell with 3 and 4 link kits, it has been proven time and time again to withstand serious off-road abuse. They are sold as a pair of control arms, fully welded and loaded with heim joints and bushings. 

These are good for stock up to 3.5" of lift

Adjustable Jeep Control Arms OVERVIEW

Ruffstuff Adjustable Strong Arms 

Lets get this right out in the open, my math is not that great but I calculate these are at least 4 times stronger than stock factory control arms for the Jeep JK, TJ, LJ & XJ! The factory arms are weak and need replacement. I don’t think you will bend ours and there are lots of advantages. 

• These have 1.25” Heim joints for the lowers and 7/8” Heim uppers. The Heims allow for more than twice the travel (36 Degrees) of the factory bushings (~10 degrees).
• Both our heims and bushings are easily replaced, you do not need a press to replace them.
• The Upper arms are not a simple butt joint, they are seriously reinforced where they meet the housing.
• The tubing of the lower control arm is 2” x .25” wall DOM, the upper’s are 1.5” X .25” and made to take any hit you can throw at them.
• These are all Jig Built by Humans (Not Machines) here in Loomis California With steel made in Alabama or Chicago.
  These are exact replacements for stock, just plug and play. These come in pairs, 1 Left & 1 Right. No Gimmicks, just Bad Ass!