RockJock Forged Johnny Joint Rod Ends are found incorporated into our suspension kits and components, but are also available individually for universal usage when custom suspension is being fabricated.
Johnny Joints are available in many sizes and configurations to meet your build’s specific needs. We offer narrow and wide body forgings, various RH and LH thread sizes and a large catalog of center pivot balls that may be installed into the forgings.
This specific Joint is a 2 in. diameter, narrow body and features a 8.130 in. long shank (from CL of joint to end of tip of threads), 3 1/2 in. of 1 in.-14 RH threads and a 1.600 in. wide x .510 in. thru-hole center pivot ball.
Being that, in our applications, we use this specific joint in TJ, LJ, XJ, MJ and ZJ front trac bars, the shank portion features a 12 degree vertical bend (3 1/2 in. from the joint CL), as seen in the photo, making it specific to fitment in this application.
Finish is gold zinc plating.

Kit Fits:

• Included Component in our CE-9120TJS TJ, LJ, XJ, MJ and ZJ Front Trac Bar
• Universal Application

Kit Includes:

• (1) Forged Johnny Joint Assembly
• (2) Rubber Washers (fit outboard on both sides of the Johnny Joint to encourage the joint to re-center itself after articulating)
• All required hardware for attaching the joint to the axle housing of a TJ, LJ, XJ, MJ or ZJ

Rod End Specs.:

• Forged 4140 Chromoly Construction
• 2 in. O.D., narrow body Johnny Joint at one end
• Measures 8.130 in. from CL of the joint to the end of the tip of the threads
• 12 degree vertical bend in the shank, 3 1/2 in. from the joint CL, specific to the CE-9120TJS Trac Bar application.
• 3 1/2 in. of 1 in.-14 RH Threads
• Features our CE-91122-6 center pivot ball (1.600 in. x .510 in.)

Notes:

• Intended for use at the axle end of our CE-9120TJS TJ, LJ, XJ, MJ and ZJ Front Trac Bar.
• See CE-9113JN for a Jam Nut to fit this joint.
• If a Weld-In Bung & Jam Nut are required, see CE-9113B.

Parts List:

• Johnny Joint Forging:  RJ-305301-2
• Johnny Joint Rebuild Kit:   CE-9112NRK
• Johnny Joint Center Pivot Ball:   CE-91122-6
• Rubber Washer:   CE-9120W
• 1/2 in.-20 x 2 3/4 in. Long Hex Bolt:   CE-91257A744
• 1/2 in. Flat Washer:   CE-H0014
• 1/2 in.-20 Flag Nut:   CE-9120NP
• Zerk Fitting:   CE-1103K21