Ideal 63" Chevy Spring Swap Kit
Ideal 63" Chevy Spring Swap Kit
Part Number:
OPR1799
Finally the full kit! Everything you need to fully put those wonderfully versatile 63" Chevy Springs under your rig. We have offered a couple of options so you can fully customize the way the springs are set up on your vehicle. We suggest using the 5" shackles because that will usually set you up with the 65-70 degrees of angle to prevent your springs from inverting, but sometimes people want a shorter or longer application depending on what axle they are running. We also have the option what size axle tube you have, because we all know how many variables there are! ***When installing Urethane bushings, apply grease as instructed: Remove the original rubber and outer metal shell clean I.D. of the spring eyes and frame brackets of any old rubber or rust remaining. Apply a thin coat of grease to the eyes of both spring and frame brackets. Apply a thin coat to the I.D., O.D. and flange of the bushings. (all surfaces that contact metal) Apply a light coat of grease to the O.D. of the sleeves.***
Kit Includes:
- 2 spring plates for your choice of axle tube and 2.5" wide
- 2 63" Chevy Frenched Leaf Spring Hangers
- 1 Pair Way Back Shackle Hangers with Bushings
- 4 U-bolts 10"x5/8"x Your Axle tube size and hardware
- 4 9/16"x4.5" Grade 8 Bolts and Nylock Nuts for Spring Hanging
- 2 9/16"x5" Grade 8 Bolts and Nylock Nuts for Shackle Hanging
- 4 Shackles with your choice of length drilled to 9/16" (Standard is 5")
THE BASE PRICE OF $226.50
MAY VARY BASED UPON THE FOLLOWING OPTIONS. PLEASE BE SURE TO NOTE YOUR CHOICES ON THE QUOTE REQUEST PAGE.
OPTIONS
Axle Tube Size