+3.5" STANDARD KIT 2010-2017 FJ CRUISER LONG TRAVEL SUSPENSION SYSTEMS (2010+ FJ CRUISER 2WD & 4WD 2010+ 4RUNNER 2WD & 4WD Also Fits 2010+ PRADO 150 SERIES)

• DAKAR race proven IFS long travel system.
• 3.5" extended 4130 chromoly tubular upper arms bolt to factory control arm mounting locations.
• Upper and lower ball joints are replaced with 1" uniballs for maximum wheel travel and component strength.
• TOTAL CHAOS includes 1" I.D. uniballs that feature a heat treated stainless steel ball & heat treated stainless steel race for maximum corrosion resistance and component longevity. These uniball's also features a military grade PTFE woven fabric liner that helps prevent noise.
• Boxed and internally gusseted 3.5" extended lower control arms bolt to factory mounting locations and are pre tabbed for dual shock capability.
• 2.5" long travel specific coil over shocks bolt into the factory coil bucket location. Extended travel shocks are too short and will not work.
• A secondary external bypass shock can be installed to increase dampening and tune-ability.
• Bolt on lower uniball adapters are CNC machined from billet steel and include shortened factory hardware for ease of installation.
• Spring rate options offer the ability to customize your ride for your specific application allowing you to custom tune the vehicle for specific terrain or desired performance.
• Adjustable limit strap clevis' are included so that you can properly limit the suspensions droop wheel travel and make necessary adjustments during the life of the limit strap.
• Stainless steel DOT braided brake lines, TC custom 17-4 stainless hi-misalignment spacers and all grade 8 mounting hardware is included.
• TC 4340 custom extended axles reuse factory inner and outer CV's to retain 4wd.
  (axles are sold separately and not included with the kit)
• 2 stage powder coat process includes a durable clear coat to provide a long lasting finish.
• Hand crafted in the U.S.A.
• Fiberglass fenders are required.
• *If FOX Shox will be used, an "F" must be added to the LT kit part number, i.e. 86004-10FJ-F

CLICK HERE FOR INSTALLATION NOTES

Urethane Pivot Upper Control Arms Kit Includes: 4130 Tubular Upper Control Arms, Boxed Lower Control Arms with Dual Shock Tabs, 1" ID Stainless Steel Uniballs, Heat-treated 17-4 Stainless Steel Hi-Misalignment Spacers, Polyurethane Bushing Pivots with Inner Sleeves, Tapered Spindle Adapters, Grade 8 Mounting Hardware, Zinc Plated End Washers, 4130 Tie-Rod Extensions, Limit Straps with Adjustable Clevis and Weld-on Mounts, DOT-Approved Stainless Steel Extended Brake Lines, Weld-on Bump Stop Spacers, CNC-Machined Billet Lower Uniball Conversions.

• Heim Joint Pivot Upper Control Arms Kit Includes: 4130 Tubular Upper Control Arms, Heim Joints & Spacers, Boxed Lower Control Arms with Dual Shock Tabs, 1" ID Stainless Steel Uniballs, Heat-treated 17-4 Stainless Steel Hi-Misalignment Spacers, Polyurethane Bushing Pivots with Inner Sleeves, Tapered Spindle Adapters, Grade 8 Mounting Hardware, Zinc Plated End Washers, 4130 Tie-Rod Extensions, Limit Straps with Adjustable Clevis and Weld-on Mounts, DOT-Approved Stainless Steel Extended Brake Lines, Weld-on Bump Stop Spacers, CNC-Machined Billet Lower Uniball Conversions.
• CLICK HERE FOR INSTALLATION NOTES
• TC includes 3/4" chromoly lined heim joints for the pivots.
• 4130 chromoly tubing heim upper control arms are fully adjustable to allow maximum tuning of caster and camber.
• Zero bushing deflection.

KIT SPECS