Whether you’re racing or just trying to add additional safety to your off-road vehicle, PRP Seats offers custom made window nets to fit your needs. All we need from you is a FULL SIZE template made of cardboard or poster board with the attachment types and locations noted. Nets are produced and shipped 2–3 weeks from when we receive your template.

This is what we like to see. A great template with attachments marked clearly.

How do I make a template?


The first step is getting your hands on a piece of card board or poster board which will span the entire window opening. Something with a little rigidity is preferred. Please do not to use scrap, printed material as it makes reading the attachment notes more difficult.


Attach the template material to the outside of the window. Any type of masking tape works fine. From the inside of the vehicle, draw the edges of the net EXACTLY how you want the Window Net to be shaped. Do NOT just trace the window opening. The extra lines confuse us. CUT OUT the final window net template.

Our cutter here just lays the template out on the material and cuts it to the exact size of the template, so your submitted template needs to be the EXACT SIZE AND SHAPE of your desired window net.

Any templates received which are not the exact size (i.e. “Add an inch here” or are not cut to size) will be charged a $25 template fee.


Note the location (and angles if necessary) of all desired attachments (listed below). Unless noted, loops will be attached at a 90-degree angle to the edge of the net.


Write your contact and shipping info ON the template. This ensures we do not misplace your info during production.


Package and contact Overland Protocol for mailing instructions

Please fold the template as few times as possible or roll and ship in a tube.

SFI Certification Requirements

To be in compliance with SFI 27.1 Certification, window nets are required to be constructed either entirely from 1″ Webbing Material, or from Mesh Material with a strip of 1″ Webbing at 8 inch intervals across the length of the net. The net must be secured to the vehicle on the top and bottom by either a Spring Rod or Latch System. This allows for a quick disconnect of the net by the occupants, regardless of the position of the vehicle. For small triangle style nets grommets are recommended.

Want to know more? Read our Guide to SFI 27.1 Window Nets

Net Material

We offer window nets in two material options. One inch webbing for racing sanctions where SFI certified nets are required and a mesh for all purpose use as well as select racing sanctions.

1″ Webbing

one inch webbing close up

One inch webbing for races requiring SFI certified nets.



Window Net Webbing close up

Mesh for all purpose riding. Built with one inch webbing support strips every 12 inches.




You can order your nets with various attachments. All have their own advantages and requirements. Please check with your race sanction FIRST to see what is legal for your class. For SFI approval, you must use rods (spring or fixed) on the top and bottom of your net.


Hook and loop attachment for window nets

Hook and loop attachment wraps around a roll bar.
Not typically legal for racing.
Not SFI approved.



Clip for window net

Clips with loops to wrap around the roll bar.
Not typically legal for racing.
Not SFI approved.



Latch for window nets

A latch is used in combination with a steel rod and link mechanism. PRP does not offer hardware for this to attach. SFI approved when using top and bottom rods.


Spring Rod

Spring rods for window nets.

Spring rod kits include the lever and tabs to weld to the cage.
SFI approved.



Grommets for window nets

SFI Approved.



Snaps for window nets

Snaps include the female end in the net and the male end with screws attached for attaching to the inside of the vehicle window.
Not SFI approved.


How do I order?

Please contact overland protocol through a quote request for a form to give us some initial information on the size and style of window net you need so we can issue an accurate quote.

This form is for quoting your window nets only. Once a quote has been issued, you will still need to send us a FULL-SIZE template of your window with the attachment style and locations noted. Include all of your contact and shipping information on the template as well.

NOTE: Window nets are built and shipped in 2–3 weeks. This time frame starts when we receive your template.