LIFT KIT | 2002-2005 RAM 1500 2WD | 7" (CAST-IRON)

OPCSK-D1-5-6 KIT INCLUDES: CAST-IRON LIFT SPINDLES, 3" COIL SPACERS, 3" FABRICATED LIFT BLOCKS & REAR U-BOLTS.

*OPCSS-D11-1 ARE REQUIRED ON 06-08 TRUCKS / SHOCKS SOLD SEPARATE!*

KIT INCLUDES AMERICAN MADE DUCTILE CAST-IRON LIFT SPINDLES, FRONT SPACERS, HAND-MADE 3" LIFT BLOCKS & U-BOLTS FOR THE 02-2005 DODGE / RAM 1500 2WD. PROVIDING A LEVEL STANCE AND INCREASED TIRE & GROUND CLEARANCE WHILE MAINTAINING THE VEHICLES STOCK RIDE. MEASURE YOUR VEHICLES STARTING HEIGHT, SOME TRUCKS MAY REQUIRE LARGER REAR BLOCKS FOR A LEVEL STANCE. LONGER SHOCKS ARE REQUIRED.

IF YOU HAVE AN 06-2008 RAM NEW FRONT BRAKE LINES (PART# CSTCSS-D11-1) MUST BE ADDED TO MAKE THE 7" KIT WORK. ALL OF THE OTHER CST PARTS ARE 100% COMPATIBLE FROM 2002-2008.

Kit Features

DESIGNED TO FIT 35" TIRES W/ 8 OR 9" WIDE WHEELS.
O.E. QUALITY DUCTILE CAST-IRON SPINDLES ARE ENGINEERED & MANUFACTURED IN THE U.S. FROM START TO FINISH, INCLUDING MACHINING.
MINIMAL TRACK-WIDTH CHANGES & MAXIMUM GROUND CLEARANCE!
HIGHER LEVEL OF QC THAN IMPORTED CHINESE COPIES.
SPINDLE QUALITY ALLOWS FOR FACTORY ALIGNMENT SPECS.
U-BOLTS ARE ZINC PLATED TO PREVENT RUST.
FABRICATED PARTS ARE COVERED IN A HIGH QUALITY TWO STAGE GLOSS BLACK POWDER-COAT.
COMPLETE KIT MADE IN THE U.S.

Notes

17" WHEELS CAN NOT HAVE MORE THAN A 4.75" BACKSPACING.
LONGER SHOCKS REQUIRED!
2006-2008 MODELS REQUIRE THE CSS-D11-1 FRONT BRAKE LINE KIT.
02-08 MODELS MUST RUN THE STOCK COILS WITH THE SPACERS IN THIS KIT!
4" FABRICATED RAM 1500 SPINDLES ALSO AVAILABLE.
LONGER FRONT SHOCKS REQUIRED. STEM TO BARPIN MOUNTING, 15.5 EXTENDED & 10.3 INCHES COMPRESSED.

INDIVIDUAL KIT PART NUMBERS

OPCSS-D1-5 | CAST-IRON LIFT SPINDLES
OPCSE-C16-4 | FRONT LIFT SPACERS (02-2008*)
CSTCSB-C14-3 | 3" LIFT BLOCKS
OPCSU-D15-11R | U-BOLT KIT W/ NUTS & WASHERS

Optional Kit Components

OPCSS-D11-1 | STEEL BRAIDED FRONT BRAKE LINES (06-08)
OPCSR-2500 | PERFORMANCE REAR SHOCK (SOLD EACH)

SUGGESTED WHEEL & TIRE SIZES

02-2008 RAM 1500

33” x12.5” OR SIMILAR ON 9-10” WIDE WHEELS
315 / 70 / 17 ON 8-10” WIDE WHEELS
35” X12.5” ON 8-9” WIDE WHEELS (MINOR TRIMMING REQUIRED)
ANYTHING LARGER, TALLER OR WIDER IS BEYOND CST RECOMMENDATIONS AND UP TO THE INSTALLER.

MAXIMUM BACKSPACING IS 4.75”

OVPRO #: OPCSK-D1-5-6