LIFT KIT | 2001-2010 1500HD / 2500HD / 2500 SUV / 3500 | 6-8" STAGE 1

CST 6-8" LIFT KIT FOR THE 4WD/2WD 1500HD/2500HD/3500 TRUCK & 2500 S.U.V.

KIT INCLUDES; ONE PIECE SUB FRAME, STRUT BARS, FRONT DIFF DROP, STEERING SUPPORTS & STABILIZER, ALL HARDWARE, REAR 4" FABRICATED LIFT BLOCKS & A ZINC-PLATED U-BOLT KIT.

STAGE 1 CST 6-8" LIFT KIT FOR THE 2001-2010 GM 8 LUG TRUCKS & 2001-2013 2500 S.U.V.

THIS KIT USES OUR UNIQUE ONE PIECE SUB-FRAME DESIGN. NEXT WE ADD STRUT BAR SUPPORTS, REINFORCED UPPER CONTROL ARM DROP MOUNTS, AND A STEERING DROP DOWN W/ HEIM JOINTED SUPPORT LINKS.

THE CST SYSTEM WILL DROP DOWN THE FACTORY SUSPENSION A TRUE SIX INCHES, INSURING THAT FACTORY STEERING AND 4 WHEEL DRIVE CV ANGLES WILL REMAIN WITHIN FACTORY SPECS. THIS KIT DOES NOT INCREASE THE TRACK WIDTH AND WITH THE USE OF CST SHOCKS OVER ALL RIDE QUALITY WILL BE IMPROVED. 2009 UP MODELS ARE EQUIPPED WITH THE GM STABILITRAK SYSTEM, INSTALLATION OF THIS KIT WILL NOT AFFECT IT IN ANY WAY.

OPCSK-C3-6-1 KIT BREAKDOWN

OPCSS-C3-6-B1 / QTY 1
OPCSS-C3-6-B2 / QTY 1
OPCSS-C3-6-B3 / QTY 1

Kit Features

DESIGNED TO FIT 35" TIRES WITH UP TO 10" WIDE WHEELS!
ALL CST GM 2500HD SUB-FRAME STYLE LIFT KITS INCLUDE A NEW CENTER-LINK THAT’S SUPPORTED WITH HEIM-JOINTS OFF OF THE SUB-FRAME TO REDUCE LATERAL MOVEMENT OF THE O.E. STEERING ARMS.
NO NEED FOR AFTER-MARKET STEERING SUPPORT, IT’S INCLUDED IN THE KIT!
ALL PARTS ARE COVERED IN A HIGH QUALITY TWO-STAGE GLOSS BLACK POWDER COAT FINISH!
STEERING STABILIZER INCLUDED WITH KIT!
O.E.M. RIDE QUALITY!
NO MODIFICATIONS TO THE FRONT DIFF!
O.E. TRACK WIDTH!
MADE IN AMERICA!!

Notes

5” MAX BACK-SPACING
ADDITIONAL REAR LIFT REQUIRED FOR A LEVEL STANCE ON SOME VEHICLES AND WHEN SUSPENSION IS SET AT 8 INCHES.
APPROVED FOR 2WD AND 4WD GM 1500HD!
CST FRONT DRIVE-SHAFT REQUIRED FOR 4WD USE AT HIGHWAY SPEEDS (LISTED BELOW)
TESTED & APPROVED FOR GM 3500 & 3500 DUALLY MODELS. MAY REQUIRE ADDITIONAL REAR PARTS, CHECK WITH YOUR LOCAL DEALER FOR DETAILS!

UPGADES & ADDITIONAL OPTIONS

OPCSR-1700 | CST FRONT SHOCK
OPCSR-2500 | CST REAR SHOCK

OPCSS-C2-14 | SINGLE SHOCK UPPER ARM W/ UNIBALLS

OPCSS-C4-6 | DUAL SHOCK UPPER ARM W/ UNIBALLS

OPCSS-C5-5 | DUAL SHOCK HOOP
OPCSP-C28-1 | FRONT DRIVE SHAFT (6.6L OR 8.1L)
OPCSP-C28-3 | FRONT DRIVE SHAFT (6.0L / NON-ALISON)
OPCSS-C22-7 | SHIFT LEVER BRACKET (07-2010 2500HD WITH CST DRIVE-SHAFT)
OPCSK-C13-2 | TORSION LIFT KEYS
OPCSS-C29-4 | CST FRONT SKID PLATE w/ CST LOGO
CST 2.0 DIRT SERIES SHOCKS
OPCSR-A27-2 | CST BLACK* BILLET RESERVOIR CLAMPS (2.0 TO 2.0)
OPCSS-C54-1 | TORSION GUSSET

COMPLETE CST DUAL SHOCK UPGRADE

SUGGESTED TIRE AND WHEEL OPTIONS

35” Tires on 9-10” wide wheels w/ 4 to 5 inches of back-spacing. (minor trimming required on some tires with 10” wide wheels)

37” Tires on 8-9” wide wheels w/ 4 to 5 inches of back-spacing and suspension set at 8 inches of lift w/ minor trimming.

Anything larger, taller or wider is up to your installer!

OVPRO #: OPCSK-C3-6-1