Eaton HO52/72 Disc Brake Conversion Bracket

Part Number: OPEHO5272

This is something we have had for a long time, the 14 Bolt Bracket, that I just was unaware of the fact that they work on the Eaton Axles. The design is stronger by eliminating spacers therefore making them slightly lighter as well. Our brackets are 3/8" thick for strength and rigidity and it costs us less to make which we can pass on to you the customer. These are for a the Eaton Single Rear Axle housing and use 73-87 3/4 ton Chevy Calipers and Rotors. These bracket need no extra mounting hardware to complete the job and make the Eaton Disk Brake Conversion easy. Sold as pairs.

*NOTE* If longer studs are needed, usually dually studs are long enough or Dormin #610-301. Double check stud diameter, the rotors recommended for these brackets require a stud with 5/8" knurled diameter with 9/16" lug diameter or they will need to be drilled for larger diameter studs. Be sure to have minimum 5/8" lug nut thread engagement 

NAPA Part numbers for '73-'87 3/4 Ton Front, 4x4, Chevy Calipers and Rotors: 

Caliper ONLY: LH - N4674, RH - N4673 - Both of these are LATER year part numbers 

OR 

LH - N4597, RH - N4596 - Both of these are EARLIER year part numbers 

Rotor Only - 4885677 - all years 

Dorman part number for 9/16 wheel studs: 610-194