Double Flex Front-Rear Lower Control Arm TJ/XJ/MJ/LJ PAIR

Double Flex Front-Rear Lower Control Arm TJ/XJ/MJ/LJ PAIR

Double Flex Front-Rear Lower Control Arm TJ/XJ/MJ/LJ PAIR

Part Number: 


I am sorry it took us so long to get these to market but they correct the many weaknesses in the factory arms with greater strength and performance. Where other companies use cheap canister type joints we use our tried and true Heat Treated Heim joints. Where others use .188" wall tubing(some even use .120 wall) we use .25" wall tubing. 

These are designed to be used with up to a 3" lift.


  • 2x.250 DOM Tube
  • 4--Heim 1.25" Assemblies With 9/16" Zinc Misalignment


  • Fits 1997 to 2006 Front and Rear Lower TJ Wrangler, Rubicon and Unlimited.
  • Fits 1984 to 2001 Front Lower XJ Cherokee
  • Fits 1986 to 1992 Front Lower MJ Comanche
  • Adjustable Length
  • Comes Welded
  • Sold In Pairs



Adjustable Jeep Control Arms OVERVIEW

Ruffstuff Adjustable Strong Arms 

Lets get this right out in the open, my math is not that great but I calculate these are at least 4 times stronger than stock factory control arms for the Jeep JK, TJ, LJ & XJ! The factory arms are weak and need replacement. I don’t think you will bend ours and there are lots of advantages. 

  • These have 1.25” Heim joints for the lowers and 7/8” Heim uppers. The Heims allow for more than twice the travel (36 Degrees) of the factory bushings (~10 degrees).
  • Both our heims and bushings are easily replaced, you do not need a press to replace them.
  • The Upper arms are not a simple butt joint, they are seriously reinforced where they meet the housing.
  • The tubing of the lower control arm is 2” x .25” wall DOM, the upper’s are 1.5” X .25” and made to take any hit you can throw at them.
  • These are all Jig Built by Humans (Not Machines) here in Loomis California With steel made in Alabama or Chicago.

These are exact replacements for stock, just plug and play. These come in pairs, 1 Left & 1 Right. No Gimmicks, just Bad Ass!