2 1/2" Johnny Joint® Rod End w/ Greasable Bolt (2.465" x .625" Ball)

CE-9110-18 - 2 1/2" Johnny Joint® Rod End w/ Greasable Bolt (2.465" x .625" Ball)

RockJock's weld-on Johnny Joints® for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint® rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180" wall machined DOM tubing. This specific joint is a 2 1/2" o.d. and features a 2.465" mounting width and a .625" thru bolt hole. This ball center does not have a flange on one side for use in front trac bar applications. Grade 8 greasable bolt with nut and washers included.

Body Type Weld-on
Body Series 2.5 inch OD, Standard Body
Body Width 2 inches
Mount Width 2.465 inches
Hole Diameter .625 inch (5/8)
Lubrication Method Internal, through ball center
Greasable Bolt 5/8 x 4 inch, 18 TPI