Adjustable Front Upper Control Arm TJ/XJ/MJ/LJ/ZJ PAIR

Adjustable Front Upper Control Arm TJ/XJ/MJ/LJ/ZJ PAIR

Part Number: 


Front Upper Control Arms are the ideal replacement for your Jeep factory control arms. Whether you're repairing or correcting your Wrangler's castor geometry after lifting, these front upper control arms will ensure a quality ride with more articulation. They're designed for stock height up to 3 inches of suspension lift and are ready for a painless installation.  The pair of arms come completely welded and utilizes your factory mounts! 
Kit includes everything in picture and comes fully welded!


The heim provided comes with spacers for a 9/16 bolt and the bracket is predrilled for 10mm. Some models require drilling for larger bolt size



  • (2) 1.5" x .250 wall DOM Tubing
  • (2) Reinforced OE style for end
  • (2) 7/8" Heim Kits w/ 9/16" Misalignment Spacers
  • Fits 1997 to 2006 Front Upper TJ Wrangler, Rubicon and Unlimited.
  • Fits 1984 to 2001 Front Upper XJ Cherokee
  • Fits 1986 to 1992 Front Upper MJ Comanche
  • Fits 1993 to 1998 Front Upper ZJ Grand Cherokee
  • Adjustable Length
  • Comes Welded
  • Sold In Pairs



Adjustable Jeep Control Arms OVERVIEW

Ruffstuff Adjustable Strong Arms 

Lets get this right out in the open, my math is not that great but I calculate these are at least 4 times stronger than stock factory control arms for the Jeep JK, TJ, LJ & XJ! The factory arms are weak and need replacement. I don’t think you will bend ours and there are lots of advantages. 

  • These have 1.25” Heim joints for the lowers and 7/8” Heim uppers. The Heims allow for more than twice the travel (36 Degrees) of the factory bushings (~10 degrees).
  • Both our heims and bushings are easily replaced, you do not need a press to replace them.
  • The Upper arms are not a simple butt joint, they are seriously reinforced where they meet the housing.
  • The tubing of the lower control arm is 2” x .25” wall DOM, the upper’s are 1.5” X .25” and made to take any hit you can throw at them.
  • These are all Jig Built by Humans (Not Machines) here in Loomis California With steel made in Alabama or Chicago.
    These are exact replacements for stock, just plug and play. These come in pairs, 1 Left & 1 Right. No Gimmicks, just Bad Ass!