4" Suspension Lift Kit | Chevy/GMC 1500 (Pickup) 4WD 4" Suspension Lift Kit | Chevy/GMC 1500 (Pickup) 4WD


4" Suspension Lift Kit | Chevy/GMC 1500 (Pickup) 4WD 4" Suspension Lift Kit | Chevy/GMC 1500 (Pickup) 4WD
 
$1,926.15 Is a base price please submit a quote request with your selection of options from below to see full pricing
 

OPTIONS

Important Kit Notes

  • 1. Requires frame bracket modification
  • 2. Will not fit Adaptive Ride Control (ARC) equipped models
  • 3. Factory 17" and 18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled.
  • 4. 17" wheels with 4.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle / tie rod.
  • 5. All aftermarket wheels should be test fit prior to mounting the tire to ensure proper clearance to the brake caliper. Some wheel profiles will not clear the brake caliper. These can be test fitted before the vehicle is lifted in a stock condition.

 

NON-CRITICAL SELECTION: Rear Shock Selection

Choose between the custom valved NX² series or the Fox 2.0 series gas charged monotube rear shocks.

NON-CRITICAL SELECTION: Traction Bar Selection

Choose to add a set of BDS traction bars to your order

Related Accessories

Related Accessories

 

 

BDS Suspension Lift Kit Warranty

No Fine Print Warranty

All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".

If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period.

Chevy/GMC 1500 4WD Pickup

 

FMVSS No.126 compliant

 

Specially designed to offer improved offroad capability while maintaining on-road handling and comfort, these new 4" IFS system are FMVSS 126 (ESC System) compliant, improve ground clearance and allow more wheel fitment options than any other kit on the market.

 

At the heart of this BDS 4" IFS system are a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the 3-piece heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility while also allowing a wider range of wheel fitment options to include factory 20" wheels. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system tying into the frame and control arm pockets to further secure the front differential to keep CV axle angles at a minimum. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers to mount onto the factory strut assemblies. A pair of BDS-branded sway bar drop brackets used to correct the operating angle of the factory sway bar as well as created a strong brace between the rear crossmember and the frame. Also supplied are new lower control arm cam bolts to allow alignment and a weld-in frame reinforcement plate for extra strength. In the rear lift blocks and longer u-bolts lift and level the stance and your choice of NX2 gas or FOX 2.0 performance series gas shocks are supplied to round out this kit allowing room for up to 35" tires to be installed.

 

Check instructions for additional tire & wheel fitment combinations

 

    • Tire & Wheel Combinations
    • 35"x12.50 w/20x9/22x9 and 5.5 - 6.25" back spacing
    • 33"x12.50 w/20x9/22x9 and 4.5 - 6.25" back spacing
    • 33"x12.50 w/17x8/17x9/18x9 and 4.5" back spacing

*Trimming may be required*