2014-2018 Dodge / Ram 2500 Pickup w/ Rear Air-Ride 6" Suspension System | Ram 2500 4WD (Diesel) w/ Rear Air Ride
$1,918.73 IS A BASE PRICE PLEASE SUBMIT A QUOTE REQUEST WITH YOUR SELECTION OF OPTIONS FROM BELOW TO SEE FULL PRICING
Important Kit Notes
- 1. Will NOT fit rear coil-spring equipped models
- 2. Fits Diesel Models Only
- 3. Indexing ring only fits 6 bolt transfer cases (most common). Some heavy-duty tow package vehicle could have 8 bolt transfer cases (w/Heavy-duty Aisin 6 speed transmissions)
- 4. Will not fit RAM 2500 Powerwagon models
- 5. Will not fit Cab and Chassis models
NON-CRITICAL SELECTION: Front Shock Selection
Select your front shock package and shock series
NON-CRITICAL SELECTION: Rear Shock Selection
Choose between the custom valved NX² series or the Fox 2.0 series gas charged mono-tube rear shocks.
NON-CRITICAL SELECTION: Sway Bar Disconnects
This kit allows a standard Ram heavy-duty trucks to enjoy the added articulation of a disconnected sway bar. The new sway bar links are made from 7/8" solid steel bar and feature greaseable, high-misalignment polyurethane bushings. All mounting hardware is included for simple, bolt on installation. The disconnect pins are made from stainless steel and make disconnecting easy via the removable pin clip. A set of lanyards with easy-to-grip buckles are included in the kit to retain the sway bar when disconnected. This kit also includes standard mounting hardware that can be installed in place of the disconnect pin for those that want a fixed mounted link.
NON-CRITICAL SELECTION: Steering Stabilizer
- Single | NX2 Series
- Single | 9500 Series
- Single | FOX 2.0
- Dual | NX2
NON-CRITICAL SELECTION: Adjustable Rear Track Bar
Choose to use your stock rear track bar or our Heavy Duty Adjustable Rear Track Bar
BDS Suspension 6" Radius Arm Drop Suspension System | 2014-17 Ram 2500 4WD Diesel w/ Rear Air-Ride
This 6" Radius Arm Drop System uses a pair of 1/4" thick steel radius arm relocation brackets to reposition the factory radius arms and correct suspension geometry and caster at 6" of lift. These brackets are designed for quick installation and create a stout mounting location for the radius arms by tying into both the factory radius arm frame mount and the side of the frame rails.
The additional height comes from a pair of specially designed progressive rate ProRide coil springs. The 6" coils have been engineered and tested to improve the ride quality and performance across all terrains while holding up to the rigors that 1-ton truck owners demand. A heavy duty track bar relocation bracket is included to recenter the front axle once lifted as well as a forged drop pitman arm to correct steering angles. Sway bar relocation brackets are used to reposition the front sway bar assembly and the supplied brake line brackets allow for the easy adjustment for the stock lines to be reused with the lift kit.
With the redesigned front suspension on 2014+ 2500 trucks, the 6" lift requires transmission/transfer case relocation components to allow the front driveshaft to function properly. BDS includes a new laser cut transmission crossmember and adjustable transmission mounting plate to increase clearance. The transfer case is repositioned by way of a supplied indexing ring kit to correct the operating angle of the front driveshaft.
In the rear, 1/4" steel, 5" tall gusseted air bag spacers are used along with a rear track bar bracket to correct axle positioning, extended length sway bar links, and bump stop extensions. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX² series or FOX 2.0 shocks.
- Tire & Wheel Combinations
- 37 x 12.50 w/17 x 9 and 4.5" - 5" back spacing
- 37 x 12.50 w/18 x 9 and 4.5" - 5" back spacing
- 37 x 12.50 w/20 x 9 and 4.5" - 5" back spacing
*Trimming may be required*
- Est. Installation: 6-8 hours
- Difficulty Level (easy 1 - 5 complicated): 3
- View complete Vehicle Fitment Information here
BDS Suspension Lift Kit Warranty
All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".
If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period.