2014-2018 Dodge / Ram 2500 Pickup w/ Rear Air-Ride 4" 4-Link Suspension System | Ram 2500 4WD (Gas) w/ Rear Air Ride


2014-2018 Dodge / Ram 2500 Pickup w/ Rear Air-Ride 4" 4-Link Suspension System | Ram 2500 4WD (Gas) w/ Rear Air Ride

$2,154.06 IS A BASE PRICE PLEASE SUBMIT A QUOTE REQUEST WITH YOUR SELECTION OF OPTIONS FROM BELOW TO SEE FULL PRICING

OPTIONS

Important Kit Notes

  • 1. DOES NOT FIT 6.4L Hemi without extensive exhaust modifications. Contact Tech Support Prior to ordering for details.
  • 2. Will not fit RAM 2500 Powerwagon models
  • 3. Not designed for rear coil spring models
  • 4. Models equipped with 2 piece rear driveshaft may require carrier bearing drop kit #122405
  • 5.Will not fit Cab and Chassis models

NON-CRITICAL SELECTION: Front Shock Selection

Choose your preferred front shock series and configuration

NON-CRITICAL SELECTION: Rear Shock Selection

Choose your preferred rear shock series and configuration

NON-CRITICAL SELECTION: Sway Bar Disconnects

This kit allows a standard Ram heavy-duty trucks to enjoy the added articulation of a disconnected sway bar. The new sway bar links are made from 7/8" solid steel bar and feature greaseable, high-misalignment polyurethane bushings. All mounting hardware is included for simple, bolt on installation. The disconnect pins are made from stainless steel and make disconnecting easy via the removable pin clip. A set of lanyards with easy-to-grip buckles are included in the kit to retain the sway bar when disconnected. This kit also includes standard mounting hardware that can be installed in place of the disconnect pin for those that want a fixed mounted link.

NON-CRITICAL SELECTION: Steering Stabilizer

NON-CRITICAL SELECTION: Adjustable Rear Track Bar

Choose to use your stock rear track bar or our Heavy Duty Adjustable Rear Track Bar

Related Accessories

Related Accessories

 

BDS Suspension 4" 4-Link Suspension System for 2014-2016 Ram 2500 Gas 4WD Models Gas Only

 

The heart of this system is the 4-link conversion that replaces the factory radius arm. Key benefits include to doing this include increased stability, wheel travel, and improved handling across all terrains. The 4-link design limits caster change to less than 1-degree of change throughout wheel travel for better handling, steering control, and overall driveability. Included are a pair of massive frame-mounted brackets precision welded and engineered to locate the new upper and lower control arms to create the optimal suspension geometry for late model RAM trucks. The 4-link brackets are fabricated from 1/4" thick steel and wrap around the frame as well as the factory radius arm brackets to create an extremely sturdy mount for the new arms. Removal of the factory radius arm brackets is not required allow the brackets to stay intact to speed up the installation time and make these kits reversible. The upper and lower control arms are built from 2" OD x 3/16" wall DOM tubing for the strength to take any abuse you can throw at them. They utilize large 2.5" OD polyurethane bushings to isolate road vibrations and are formed inward to allow for extra tire clearance while repositioning the front axle slightly forward for increase tire clearance to the backside of the front fenders when turned. These arms are finished in a durable textured black powder coating and use grease fittings for easy servicing.

 

The additional front height comes from a pair of specially designed progressive rate ProRide coil springs. The 4" coils have been engineered and tested to improve the ride quality and performance across all terrains while holding up to the rigors that 3/4-ton truck owners demand. A heavy duty track bar relocation bracket is included to recenter the front axle once lifted as well as a forged drop pitman arm to correct steering angles. Sway bar relocation brackets are used to reposition the front sway bar assembly and the supplied brake line brackets allow for the easy adjustment for the stock lines to be reused with the lift kit.

 

In the rear, 1/4" steel, 3.5" tall gusseted air bag spacers are used along with a rear track bar bracket to correct axle positioning, extended length sway bar links, and bump stop extensions. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX² series or FOX 2.0 shocks.

    • Tire & Wheel Combinations
    • 37" x 12.50 w/17" x 9" and 5.625" back spacing
    • 35" x 12.50" w/18" x 9" and 4.5 back spacing
    • 35" x 12.50" w/20" x 9" and 4.5 back spacing

*Trimming may be required*

 

BDS Suspension Lift Kit Warranty

No Fine Print Warranty

All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".

If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period.