2013-2018 Dodge / Ram 3500 Pickup 6" Suspension System | Ram 3500 4WD (Diesel)


2013-2018 Dodge / Ram 3500 Pickup 6" Suspension System | Ram 3500 4WD (Diesel)

$1,736.24 IS A BASE PRICE PLEASE SUBMIT A QUOTE REQUEST WITH YOUR SELECTION OF OPTIONS FROM BELOW TO SEE FULL PRICING

 

OPTIONS

Important Kit Notes

  • 1. Kits come standard with 6-Bolt indexing ring kit. If equipped with heavy-duty 8-bolt t-case order 122813 in place of 122623
  • 2. For rear leaf spring equipped models only.
  • 3. The carrier bearing drop (122405) is necessary for models equipped with two piece rear drive shaft.
  • 4. Some vehicles may require rear driveshaft spacer kit 122007 to maintain adequate rear driveshaft engagement
  • 5. Will not fit Cab and Chassis models
  • 6. Not for use with factory rear airbag suspensions

NON-CRITICAL SELECTION: Rear Lift

Choose your preferred rear lift method/height.

NON-CRITICAL SELECTION: Shock Selection

Choose between the custom valved NX² series or the Fox 2.0 series gas charged monotube rear shocks.

NON-CRITICAL SELECTION: Steering Stabilizer  

NON-CRITICAL SELECTION: Indexing Ring

Choose either the 6 bolt or 8 bolt Indexing Ring

NON-CRITICAL SELECTION: Sway Bar Disconnects

This kit allows a standard Ram heavy-duty trucks to enjoy the added articulation of a disconnected sway bar. The new sway bar links are made from 7/8" solid steel bar and feature greaseable, high-misalignment polyurethane bushings. All mounting hardware is included for simple, bolt on installation. The disconnect pins are made from stainless steel and make disconnecting easy via the removable pin clip. A set of lanyards with easy-to-grip buckles are included in the kit to retain the sway bar when disconnected. This kit also includes standard mounting hardware that can be installed in place of the disconnect pin for those that want a fixed mounted link.

NON-CRITICAL SELECTION: Adjustable Front Track Bar

Choose to use your stock front track bar or our Heavy Duty Adjustable Front Track Bar

NON-CRITICAL SELECTION: Traction Bar

For those looking to maximize rear axle control a set of BDS Traction Bars is just the ticket. Reduce axle wrap and wheel hop during acceleration. Highly recommended for high horsepower/torque applications. Tubular design for good looks and serious axle control. Black powder-coat finish. Standard and RECOIL Series Traction Bar Systems are available.

Related Accessories

Related Accessories

 

BDS Suspension 2013-17 Ram 3500 Diesel 4wd 6" Suspension System.

 

This system is for the all new redesigned front suspension for the Ram heavy duty trucks. The lift is designed around the relocation of the factory radius arm in order to correct suspension and steering geometry to work with 6" of lift. The radius arms are relocated with a uniquely designed bracket that mixes the ease of installation you get with an adapter-type bracket with the strength and durability of a full replacement radius arm mount bracket. The new relocation bracket ties into both the factory radius arm frame mount and the side of the frame rail.

 

At the frame, the new mount is fastened with specially machined sleeves and threaded inserts. The threaded inserts (2) do require a minor amount of welding in order to provide the strongest possible connection. This portion of the installation can be completed without welding and then transported to a weld shop to be welded if necessary.

 

In addition to the radius arm relocation, the kit includes everything else to properly lift the 2013-17 Ram 3500s. Track bar relocation, dropped pitman arm and brake line relocation hardware position all the steering and brake components properly to work with the added ride height provided by the new progressive rate, full replacement coils springs.

 

In the front, sway bar relocation brackets drop the sway bar at the frame to correct the sway bar angle and allow use of the factory sway bar links. New 6" progressive rate coil springs provide the correct ride height and great on/off road ride quality.

 

The front driveshaft on the new Ram trucks has a more limited range of motion compared to the previous generation trucks. In order to correct the driveline angles, we include a new transmission crossmember with an adjustable height transmission mount plate and a transfer case indexing ring kit. Unlike the previous generation trucks, there is not enough clearance between the transfer case and the factory transmission crossmember to install an indexing ring on its own. The new crossmember provides the clearance needed. The ability to adjust the transmission mount height is an added bonus and nice "fine-tuning" feature.

 

The rear of the truck is lifted via a 5" block and u-bolt system which provides a level-to-slightly tail high stance.

    • Tire & Wheel Combinations
    • 37" x 13.50 w/17" x 9" and 5.625" back spacing
    • 37" x 12.50" w/18" x 9" and 4.5 back spacing

*Trimming may be required*

 

BDS Suspension Lift Kit Warranty

No Fine Print Warranty

All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".

If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period.