2011-2016 Ford F250/F350 Super Duty 4" Coilover Conversion 4-Link Suspension System - Ford F250/F350 4WD Diesel
$4,155.82 IS A BASE PRICE PLEASE SUBMIT A QUOTE REQUEST WITH YOUR SELECTION OF OPTIONS FROM BELOW TO SEE FULL PRICING
Important Kit Notes
- 1. Removal of factory block required. Rear add a leaf is required for models equipped with factory 3-7/8" block for level to tail high stance. Single add-a-leaf kit # 113218 recommended for more level stance - Dual add-a-leaf kit # 113209 recommended for tail high stance. (Add-A-Leafs do not apply to rear leaf spring equipped systems).
- 2. If equipped with 2-piece driveshaft, a driveshaft alignment kit (#123402) may be required.
- 3. Although extremely rare, front and/or rear driveline vibration may occur.
- 4. If equipped with rear sway bar, #123009 required.
- 5. U-bolts will not work on dually.
NON-CRITICAL SELECTION: Rear Lift
Choose between rear blocks or BDS Glide Ride full leaf springs.
NON-CRITICAL SELECTION: Steering Stabilizer
- Single | NX2 Series
- Dual | NX2 Series
- Single | 9500 Series
- Shock Boots
NON-CRITICAL SELECTION: Rear Add-a-Leaf Kit
IMPORTANT NOTE: If you chose "Rear Leaf Springs" during the Rear Lift Options selection, choose "No Rear Add-A-Leaf Kit" and continue to the next selection. This option only applies to "Rear Block Kit" equipped systems.
When building your system with the "Rear Block Kit" option, models equipped with a factory 3-7/8" block require an optional add-a-leaf kit to acheive a level to tail high stance. On these models, we recommend adding single add-a-leaf kit # 113218 for a more level stance - Dual add-a-leaf kit # 113209 is recommended for tail high stance.
- No Rear Add-A-Leaf Kit
- Rear Add-A-Leaf Kit (Single)
- Rear Add-A-Leaf Kit (Dual)
NON-CRITICAL SELECTION: Traction Bars
- RECOIL System (Short Box)
- Shock Boots
BDS Suspension 4" Coilover Conversion 4-Link System
If you're looking for a kit to outperform on the trail and on the street then the BDS coilover conversion 4-link systems is for you. This system uses a pair of precision tuned FOX 2.5 factory series remote reservoir coilovers for superior dampening capabilities and fade free performance when your blazing a trail on the harshest of terrains. While utilizing a pair of specially tuned FOX 2.5 factory series remote reservoir coilovers designed for the weight of the Powerstroke diesel Super Duty, the coilovers come prebuilt for 4" of lift and ready to install right out of the box. They use a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs, 6061-T6 billet aluminum ends and specially formulated race proven oil. The threaded body is easily adjustable to dial in ride height to compensate for accessories like heavy winch bumpers. Also included are heavy duty upper and lower mounting brackets that bolt into the factory coil bucket and lower axle mount for easy installation with no welding required. The upper brackets integrate a mount to secure the remote reservoir. An auxiliary FOX 2.0 gas shocks is used up front to further improve dampening capability.
Upgrading the factory stamped steel radius arms this system converts over to a true 4-link design to improve drivability, performance and strength. The heavy duty 1/4" thick steel frame mounted 4-link brackets bolt into factory holes to allow the four massive tubular control arms to be installed. These arms are build from 2" OD x .250" wall tubing with large greasableX bushings. 4-link design optimizes the front suspension geometry and reduces caster change through wheel travel to less than 1-degree.
Also included up front of this system is a forged drop pitman arm and front track bar relocation bracket to correct steering and track bar angles as well as to center the axle under the vehicle. Front bump stop extensions, sway bar drops, and brake line relocation brackets round out the front of this system. In the rear, this kit lifts and level the stance using your choice of a replacement rear lift block or GlideRide leaf springs. The leaf springs use a 5-leaf design with built in overload leaf to assist when carrying heavy loads. New black e-coated u-bolts, brake line brackets and Fox 2.0 performance gas shocks are supplied to round out the rear of the 4" coilover conversion 4-link system.
As with all BDS lift kits this performance coilover system is backed by Factory Protection Plus offing BDS's No Fine Print Warranty and 5-year, 60,000-mile drivetrain protection.
- Tire & Wheel Combinations
- 35" x 12.50" w/17 x 9 and 4.5" back spacing
- 35" x 12.50" w/18 x 9 and 4.5" back spacing
- 35" x 12.50" w/20 x 9 and 4.5" back spacing
*Trimming may be required*
- Est. Installation: 9 hours
- Difficulty Level (easy 1 - 5 complicated): 3
- View complete Vehicle Fitment Information here
BDS Suspension Lift Kit Warranty
All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".
If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period.