2008 Dodge / Ram 2500 Power Wagon 4" Long Arm Lift Kit - Dodge Ram 3/4 Ton Powerwagon

2008 Dodge / Ram 2500 Power Wagon 4" Long Arm Lift Kit - Dodge Ram 3/4 Ton Powerwagon



Important Kit Notes

  • 1. These vehicle were manufactured with two different diameter rear axles. You will need to measure the diameter of your rear axle before ordering. It should be 3-1/2" or 4" in diameter.
  • 2. Depending on the factory transmission mount, some 4" kits may require the transfer case indexing kit if a drveline vibration persists. See installation instructions for details.

CRITICAL SELECTION: Rear Lift Options/Axle Diameter

This system is available with either the standard rear block kit or new BDS Glide-Ride rear leaf springs. Both of these options are available to work with the 2 rear axle diameters. Please measure your rear axle and select the appropriate rear kit for your vehicle.

NON-CRITICAL SELECTION: Front Shock Selection 


NON-CRITICAL SELECTION: Steering Stabilizer 

Do You Have Y or T Style Linkage?

Related Accessories

Related Accessories

Related Accessories

Related Accessories



BDS Suspension 4" Long Arm Kit for the 2008 Dodge Ram 2500 Powerwagon


This 4" long arm lift kit come with 4" Pro-Ride Coil Springs and features solid upper long arms and tubular lower long control arms. The long control arm reduce caster change through wheel travel creating a more controlled feeling in the steering wheel both on and off road. This 4-Link long arm system retains the factory triangulation of the arms which adds to the stability of the suspension system. A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket is included to properly center the axle under the vehicle. Extended bump stops and sway bar links are included to maintain the OE characteristics. All four control arms are greasable for long term performance. greasable upper and lower control arms. The extended length lower control arms reduce caster change through wheel travel.


The rear of the Dodge Ram is lifted via a 4" block kit or optional Glide-Ride Leaf Springs.


Not only is the kit designed to last, but so is the finish. Every bracket is powder coated twice with a base grey color and then a clear coat over the top to ensure long term performance of our finish.

    • Tire & Wheel Combinations
    • 36" x 12.50" w/17 x 9 and 5" back spacing

*Trimming may be required*


BDS Suspension Lift Kit Warranty

No Fine Print Warranty

All BDS Suspension lift kits come with the security of knowing you purchased the finest lift kit in the aftermarket suspension industry. We back our commitment to engineering reliable, quality 4x4 off-road Jeep and truck suspension products with our unique "No BS Hardcore Lifetime Warranty".

If you are the original purchaser of any BDS lift kit and it breaks, we will give you a new part. Period.