2 1/2" Johnny Joint® Rod End - Externally Greased (2.625" x .5625" Ball)
CE-9110P - 2 1/2" Johnny Joint® Rod End - Externally Greased (2.625" x .5625" Ball)
RockJock's weld-on Johnny Joints® for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint® rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The outer shell is weldable .180" wall machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joint is a 2 1/2" o.d. and features a 2.625" mounting width and a .5625" thru bolt hole.
|Body Series||2.5 inch OD, Standard Body|
|Body Width||2 inches|
|Mount Width||2.625 inches|
|Hole Diameter||.5625 inch (9/16, 14mm)|
|Lubrication Method||External zerk fitting located on joint body|