Weld It Yourself Link


Weld It Yourself Link

The GIANT Motorsports Weld It Youself Link is made out of  P&O mild so you

can tig or mig weld the two lower link arms. The side plates are 3/16′, and

the top plates are 1/8′.  The kit includes 1.75′ x .120 D.O.M. tube, the

forward bushing sleeve, 1.25′ threaded sleeves for the rear, and 7/8 x .188

chro-moly boss for two shock mounting locations on each arm.  The length

between the center of the bushing to the center of the heim is 55′.  The shock

mounting locations divided are 1′ back from the center.

We have been racing and running this arms for years, with a 3′ king by-pass

valved with extra compression to work without a hydralic bump stop,
putting all the force into the center of the arm testing the stress, and have

encounter zero problems.

The complete kit inlcudes everything necessary to construct two lower link

arms including instructions.

$650.00 WIY link arm kit W/O hiems or bushing half’s
or $475.00 WIY link arm W/O tubes, bungs, bosses or sleeves
$325.00 WIY upper & lower frame pivots that need extra cutting and plate
$375.00 WIY truss & 4-link mounts to setup a stock 9″
or $960.00 Giant TT housing any width with semi ends welded on
 $200.00 WIY 4-link mounts for TT housing (there is extra straight
built in to this housing so truss is not needed)
$225.00 Upper shock mounts to build cage off of.